Experimental Investigation of Cutting Parameters Effect on Surface Roughness During Wet and Dry Turning of Low Carbon Steel Material

Authors

  • Muamar M. Ben Isa Mechanical and Industrial Engineering Department, Faculty of Engineering, Al-Asmarya Islamic University Zliten, Libya
  • Hitem A. Aswihli Mechanical and Industrial Engineering Department, Faculty of Engineering, Al-Asmarya Islamic University Zliten, Libya.
  • Abdusalam Alkhwaji Mechanical and Industrial Engineering Department, Faculty of Engineering, Al-Asmarya Islamic University Zliten, Libya

Keywords:

Turning, Surface roughness, cutting parameters, wet and dry cutting

Abstract

Surfaces quality is one of the most specified customer requirements for machine parts. The major indication of surfaces quality on machined parts is surface roughness. This research aims to study the cutting parameters (spindle speed, feed rate and depth of cut) and their effect on the surface roughness of low carbon steel workpieces machined under dry and wet turning conditions, using carbide cutting tool with a constant tool nose radius. Results revealed that, surface roughness is highly affected by the cutting parameters and also the cooling conditions

References

D. K. Suker, M. S. Alsoufi, M. M. Alhusaini, S. A. Azam, “Studying the Effect of Cutting Conditions in Turning Process on Surface Roughness for Different Materials”, World Journal of Research and Review (WJRR), vol. 2, pp. 16-21 , April 2016.

Anand S.Shivade, Shivraj Bhagat, Suraj Jagdale, Amit Nikam, Pramod londhe, “Optimization of Machining Parameters for Turning using Taguchi Approach”, International Journal of Recent Technology and Engineering (IJRTE), vol. 3, pp. 145-149, March 2014.

Mehmet Alper, İlhan ASİLTÜRK, “Effects of Cutting Tool Parameters on Surface Roughness”, International Refereed Journal of Engineering and Science (IRJES), vol. 4, pp.15-22 , August 2015.

Bheem Rajpoot , Dharma Moond , Dr. Sharad Shrivastava, “Investigating the Effect of Cutting Parameters on Average Surface Roughness and Material Removal Rate during Turning of Metal Matrix Composite Using Response Surface Methodology”, International Journal on Recent and Innovation Trends in Computing and Communication, vol. 3, pp. 241 – 247, January 2005.

S. Thamizhmanii, S. Saparudin, S. Hasan, “Analyses of surface roughness by turning process using Taguchi method”, Journal of Achievements in Materials and Manufacturing Engineering, vol. 20, pp. 503-506, January-February 2007.

S. Das, R. Nayak, D. Dhupal, A. Kumar, “Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects”, International Journal of Automotive Engineering, vol. 4, pp 758-768, Septemper 2014.

Cemal Cakir M, Ensarioglu C, Demiraya I, Mathematical Modeling of Surface Roughness For Evaluating The Effects of Cutting Parameters and Coating Material. Journal of Materials Processing Technology, vol. 209, pp 102-109, January 2009.

Downloads

Published

2021-01-30

How to Cite

Ben Isa, M. M., Aswihli, H. A., & Alkhwaji, A. (2021). Experimental Investigation of Cutting Parameters Effect on Surface Roughness During Wet and Dry Turning of Low Carbon Steel Material. Journal of Academic Research, 17, 10–16. Retrieved from https://lam-journal.ly/index.php/jar/article/view/294

Issue

Vol. 17 (2021)

Section

العلوم الهندسية والتطبيقية

License

Copyright (c) 2021 Muamar M. Ben Isa، Hitem A. Aswihli، Abdusalam Alkhwaji

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)